Mimaki Plotter in Drawcut

Geändert am Wed, 27 Jan 2021 um 03:41 PM

DrawCut – Mimaki Plotter

There are several ways to connect to a Mimaki Plotter, depending on how hold it is.

Method 1:

1. Select “Windows Port”

2. Choose “CustomPort”

3. Click “Configure”

1. Select “Filter Devices”

2. Select the “MMK USB2.0” USB filter.

3. Click “Refresh” to display a list of matching port.

If you see anything available in the listbox underneath the “Refresh” button, click on it to select it, and click “OK”


Method 2:

 

If you  have a CG SRIII,  do the following:

Download and install this file:

https://mimaki.com/product/cutting/c-roll/cg-srIII-series/driver.html?driver=81057

Then download and install the CG-SRIII Printer Driver ver1.60

https://mimaki.com/product/cutting/c-roll/cg-srIII-series/driver.html?driver=81076

Or you can choose and download the files from the Mimaki web site, based on your model.

You can find the Mimaki USB Driver and Windows Printer drivers at:

https://mimaki.com/download/cutting.html

Select CG-FCXII or CG-SRIII

For CG-SRIII, you can directly go to:

https://mimaki.com/product/cutting/c-roll/cg-srIII-series/download.html

After installing the Mimaki Printer driver, make sure that it is set to the CG Port.


Select the Mimaki Printer driver in DrawCut by doing the following:

Select the mimaki printer in the printer lists.


War dieser Artikel hilfreich?

Das ist großartig!

Vielen Dank für das Feedback

Leider konnten wir nicht helfen

Vielen Dank für das Feedback

Wie können wir diesen Artikel verbessern?

Wählen Sie wenigstens einen der Gründe aus

Feedback gesendet

Wir wissen Ihre Bemühungen zu schätzen und werden versuchen, den Artikel zu korrigieren